
Automotive rubber bushes play a critical role in a vehicle's suspension system. They connect components such as the chassis and control arms while absorbing vibrations, managing suspension movement and withstanding the continuous stresses generated during driving. Their performance depends not only on the quality of the rubber but also on the precision of the metal components, the strength of the rubber-to-metal bond and the manufacturing processes involved.
At TechNix, we manufacture rubber bushes to meet demanding automotive requirements, ensuring consistent performance even under heavy loads and extreme operating conditions.
The bushes are primarily used for automotive suspension in front and rear control arms, chassis suspension, shock absorbers, trailing arms and even in mountings.
Advanced Rubber Compounds for Superior Performance
The foundation of a durable rubber bush lies in its compound formulation. At TechNix, we use a proprietary blend of Natural Rubber (NR), Butadiene Rubber (BR) and carefully selected antioxidant additives. This formulation is developed to deliver an optimal balance of strength, elasticity, durability and resistance to environmental degradation.
The hardness of rubber also varies as per application, with the most critical applications requiring RSS 1X natural rubber. Testing for ash content is also important to ensure quality.
Our rubber compounds are engineered to provide excellent resilience and low compression set, allowing the bushes to retain their intended shape and performance over prolonged use. This helps maintain consistent suspension movement, absorb road vibrations and minimise unwanted rattling noises.
Metal Selection
Precision Engineering and Advanced Injection Moulding
A strong rubber-to-metal bond is essential for the reliability of any suspension bush. The rubber must adhere firmly to both the outer metal body and the inner pipe while maintaining precise dimensional tolerances.
TechNix employs advanced transfer-injection moulding technology and precision-engineered moulds to achieve consistent rubber distribution, dimensional accuracy and superior bonding. Our manufacturing processes are designed to ensure that the rubber remains securely bonded to the metal components, even when subjected to repeated dynamic loads and high levels of stress.

The inner pipes and outer metal bodies are engineered to withstand loads substantially beyond typical vehicle operating requirements, providing an additional margin of structural reliability.
OEM-Standard Metal Design and Surface Treatment
The geometry of the metal components plays an important role in determining the overall strength of a rubber bush. In accordance with relevant OEM designs, our inner pipes incorporate specially engineered bulging profiles wherever required. This increases the available bonding surface area between the rubber and metal, helping improve bond integrity and overall durability.

We also employ appropriate chemical bonding agents to achieve reliable adhesion between the rubber compound and metal surfaces.
Before moulding, metal pipes undergo phosphating and other appropriate surface preparation processes to facilitate effective bonding and improve corrosion resistance. Depending on the application, we use protective finishes such as zinc plating and zinc-nickel plating. These coatings can provide corrosion resistance of up to 1,000 hours in salt spray testing, subject to the specified coating system and test conditions.
Even after manufacturing, care is taken during packaging and storage. Our packaging processes are designed to minimise exposure to moisture and corrosive conditions, helping preserve the integrity of the metal components until they reach the customer.
Swaging for Enhanced Bond Strength and Dimensional Consistency
Swaging is another important process employed in the manufacture of automotive rubber bushes. Performed in accordance with applicable OEM specifications, this process mechanically deforms designated metal sections to achieve the required retention and dimensional characteristics.

When correctly engineered for the application, swaging helps improve mechanical retention, support rubber-to-metal bond integrity and compensate for dimensional variations. This contributes to a more uniform and reliable finished product.
OEM-Standard Manufacturing and Quality
At TechNix, we understand that suspension components must deliver consistent performance throughout their service life. Every aspect of our manufacturing process, from rubber compound formulation and metal preparation to injection moulding, bonding and finishing, is focused on achieving the required performance standards.
Our experience extends across the automotive supply chain. We are established suppliers to major Tier 1 OEM suppliers and also serve as direct OEM suppliers for select automotive brands.
With our engineering capabilities, manufacturing infrastructure and commitment to quality, TechNix delivers automotive rubber bushes manufactured to demanding OEM specifications.
We also have an in house testing center to ensure customers are getting the perfect product. We comply to ISO 9001:2015 UAF (United States of America) Accreditation.
TechNix – Engineered for Strength. Built for Reliability.





